Wachs SDB 206, User Manual, Page: 21 / 76

Safety: Safe Operating Guidelines
E.H. Wachs Part No. 56-MAN-01, Rev. B 19
Pneumatic Powered Equipment
• Air motors may get hot during operation and may cause burns. Do not touch the air motor,
except for operator controls, during or after operating the machine.
• Before disconnecting the air line from the equipment, always turn off air at the source and
bleed all residual air pressure at the air motor.
loss or Shut-off of Power Supply
For all power sources, follow all lock-out/tag-out proce dures required at the worksite when
disconnecting or servic ing the equipment.
•
PNEUMATIC POWERED EQUIPMENT
—Disconnect the air supply from the machine after loss of
power to prevent accidental restarting of the machine. Lock out the power supply immediately.
•
HYDRAULIC POWERED EQUIPMENT
—Disconnect hydrau lic lines from the hydraulic manifold to
prevent acciden tal restarting of the machine. Lock out the power supply immediately.
•
ELECTRIC POWERED EQUIPMENT
—If the electric drive shuts off because of its built-in thermal
protection, dis connect the motor from the power source immediately.
Safety Alerts in This Manual
The following alerts are used throughout this manual to indicate operator safety hazards. In all
cases, these alerts include a notice describing the hazard and the means to avoid or reduce risk.
Carefully read all safety alerts.
This icon is displayed with any safety alert that indicates a personal injury hazard.
WarninG
This safety alert indicates a potentially hazardous situation that, if not avoided, could result in
death or serious injury .
caUtion
This safety alert, with the personal injury hazard symbol, indicates a potentially hazardous
situation that, if not avoided,
could
result in
minor or moderate injury
.