Wachs SDB 206, User Manual, Page: 38 / 76

SDB 206 and FF 313
36 Part No. 56-MAN-01, Rev. B E.H. Wachs
7. Place the mandrel assembly into the flange I.D. with one leg at the 6 o'clock position. The legs
should be kept as close as possible to the flange I.D. edge, yet back far enough to perform the
desired operation. Snug the mandrel into place by tightening the draw bar nut with the supplied
1-1/8" wrench (Figure 3-15).
notE
Observe the mandrel keyway slots. When the slots are at the nine o'clock and three o'clock
position the flange facer motor position can be placed at the six o'clock or twelve o'clock
location. Position the mandrel slots at the desired location for air motor clearance or operation.
Figure 3-15.