Wachs FF 424, User Manual, Page: 25 / 70

FF 424 FLANGE FACING SYSTEM
The following is a listing of individual controls and components that are important to the successful operation
of the FF 424. Prior to attempting to set up and operate the FF424, it is recommended that you become familiar
with these items:
POWER HEAD
FLANGE FACING MODULE
TRIP RING AND TRIPS
LIFTING HANDLE
AXIAL INFEED HANDLES
TOOL HOLDER SLOT
TOOL BIT (HIGH & LOW RANGE)
MACHINE LOCKING SCREWS
AXIAL INFEED INDICE DIAL
STARWHEEL
AIR MOTOR
AIR INLET
ADJUSTABLE SPEED CONTROL
ON-OFF LEVER
MANDREL
MANDREL ADAPTOR CONE (8.5-12.8” RANGE)
MANDREL ADAPTOR CONE (12.7-20.0”
RANGE)
MANDREL EXPANSION NUT
ADAPTOR CONE MOUNTING SCREWS (3 EACH)
LEG SETS (3 PER SET WITH 1 ADJUSTABLE)
ALIGNMENT FIXTURE
A.
B.
C.
D.
E.
F.
G.
H.
J.
K.
L.
M.
N.
0.
P.
0.
R.
S.
T.
U
SECTION I FF 424 INTRODUCTION
2.
23