13
1.5 Safety features
1.
Important safety notes
1.5.1 for all milling machines
In order to enable you to work safely with our machines, we have incorporated the following safety me-
chanisms. These meet the relevant European safety requirements:
Protective hood
The protective hood is secured to the machine housing and is designed to prevent touching of the rota-
ting tool spindle. The protective hood is constructed in such a way that the working height (depending
on the dimensions of the workpiece and tool) can be adjusted. The protective hood can be swiveled to
enable fast exchange of tools.
ON/OFF switch with under-voltage trigger
The ON/OFF switch is fitted with an under-voltage trigger, thus, in the event of a power failure, the ma
-
chine does not switch itself back on automatically. This prevents risks caused by the unexpected motion
of the tool spindle.
Emergency off switch
The emergency off switch acts to quickly stop the machine.
Overload protection
The machine is fitted with an overload protection feature. This overload protection feature switches
the main drive motor off automatically when the machine is overloaded. The machine can only then be
switched on after a waiting period.
1.5.2 for milling machines for the installation of a CNC controller and
for CNC milling machines
Machine safety cabin
(optional)
I
n CNC mode, the door to the machine safety cabin must be closed in order for the milling machine to
work in CNC operation.
You can only work in CNC mode with the
doors closed
.
Work carried out in conventional mode is carried out with the door open. The mode switch must be
switched to manual mode.
The main spindle can be switched on when the doors are closed or open.
Working in CNC mode without machine safety cabin may pose a serious risk to the machine
operator and cause serious accidents.
1.5.3 for CNC milling machines
Switch for operating modes
The mode switch has 3 settings (CNC mode – Idle position – Manual mode) that can only be selected
with a key. After selecting the mode, the key can be removed in order to prevent a switching of the mode
type by unauthorised persons.
Summary of Contents for CC-F1410 LF hs
Page 41: ...41 7 Fitting and removing the tools 42 6 Spannen und Ausdr cken der Werkzeuge 1 2 3 4 5...
Page 98: ...98 16 Drawings and legends 16 12 Spindle Z axis with ball screws 16 12 1 F1410 LF F1410 LF hs...
Page 126: ...126 16 Drawings and legends 16 22 Support arm for control panel 1 2 3 4 5 6 8 9 5 4 7 9 8...
