45
4. Drilling milling stands BF1240 | BF1242 | BF1243 | BF1244
4.1 Versions
Drilling milling stand BF1240
Solid steel column
500 mm
, hexagonal steel boom
350 mm
No. 24400
without work table
No. 24404
with work table Ø 180 mm
Drilling milling stand BF1242
Solid steel column
500 mm
, hexagonal steel boom
500 mm
No. 24401
without work table
No. 24408
with work table Ø 180 mm
Drilling milling stand BF1243
Solid steel column
750 mm
, hexagonal steel boom
500 mm
No. 24500
without work table
No. 24504
with work table Ø 180 mm
Drilling milling stand BF1244
Solid steel column
1000 mm
, hexagonal steel boom
500 mm
No. 24454
without work table
No. 24457
with work table Ø 180 mm
4.2 Assembly
1. Please put the column (7) into the hole of the base plate (1).
2. Tighten the clamping screw (1.1).
3. Insert the hexagonal steel boom (11) into the hexagonal bore of the guide housing (12), so that the toothing of the
steel boom (11) and the feed shaft (10) fit together.
4. By means of the clamping screws (11.1) the guide is play-free adjustable.
5. Not the drilling milling stand is complete and ready to work.
6. Fix the drilling milling stand to a strong support featuring absolute plainness and use 4 screws M8.
4.3 Lubrication
Prior to every use, some commercially available lubricating oil should be applied to the steel column and to
the rotating points of the feed shaft. The housing and the hexagonal steel boom of the drilling and milling
stand must be moved up and down in this process.
