60
15. Tapping attachment order no. 35805
15.1 Operation
Lower the machine support (9) of the drilling stand respectively drilling milling stand with clamped tapping attachment
(2 - 5) until the workpiece to be drilled. The thread depth can be adjusted exactly by means of the adjusting ring (2)
(Figure 1)
.
Cut the thread with the help of the adjustable tap wrench. If the ring (2) arrives on the receptacle (4)
(Figure 2)
, the
desired thread depth is reached.
Figure 1
In this picture the collar is prepared for a thread length of 10 mm.
Figure 2
workpiece
tap
