39
Please read before start-up!
Each person who operates, maintains or repairs the device
must have read the operating instructions,
especially the safety regulations before start-up.
Original version in German
Status at 05/2018
Dear customer!
With the purchase of WABECO Drilling milling stand you have chosen a quality product. We have taken great care in its
manufacture and we have given it a thorough quality control test.
These operating instructions are to help you to work with it safely and properly. Therefore, please read the respective
instructions carefully and pay attention to them.
After unpacking the device please check to see if any kind of damage has occurred during transportation. Any complaints
must be made immediately. Complaints made at a later date cannot be accepted.
Changes referring the construction, configuration and accessories remain in the interest of development in reserve.
Therefore you can not make any demands cause of our indications, illustrations and descriptions. If there is anything
unclear, please do not hesitate to contact us.
Duplications or copies of this document of any kind, or of exerpts, require a written approval by
WABECO.
Index
1. Delivery
41
2.
Safety instructions
41
3.
Drilling stands B1200 | B1230
42
3.1. Versions
42
3.2 Assembly
42
3.3 Lubrication
42
3.4
Attaching the drive unit
42
3.5
Working with depth stop
42
3.6
Adjust the play of the machine support
42
3.7
Drawing and legend B1200
43
3.8
Drawing and legend B1230
44
4.
Drilling milling stands BF1240 | BF1242 | BF1243 | BF1244
45
4.1 Versions
45
4.2 Assembly
45
4.3 Lubrication
45
4.4
Attaching the drive unit for drilling
46
4.5
Attaching the drive unit for milling
46
4.6
Working with depth stop
47
4.7
Adjust the play of the guide housing
47
4.8
Drawing and legend
48
5.
Work table order no. 22310
50
5.1
Rotate and swivel the work table
50
5.2
Drawing and legend
50
6.
3-spoke hub for Z-axis vertical travel order no. 24462
51
6.1 Assembly
51
6.2
Drawing and legend
51
