7
NL
M1.2.CUT80HFI.NLFREN 09102018
2�4 Kenmerken van het systeem
5
1.6 System characteristics
Figure 1-4: Duty cycle
Figure 1-5: Output characteristic curves
1
)
Duty cycle
2
)
Output characteristics
External characteristic of maximum output
External characteristic of minimum output
Relationship with ratedload
1. GENERAL
DESCRIPTION
Rated duty cycle refers to the percentage of the normal work time of the machine under rated
maximum current holding in the period when taking 10 minutes as a period. The rated duty
cycle of this machine is 35
%.
Using the cutting machine continuously overrunning the rated load
may lead to overheating of the machine, and frequently using the machine overrunning the rated
load may accelerate the aging of the machine or even burn the machine.
Q(%)
100
(A)
I
80
60
40
20
50
40
30
20
10
0
U
2
(V)
U
0
2
(A)
I
0
1) Inschakelduur
De inschakelduur verwijst naar het percentage normale werktijd van de machine
onder de nominale maximale stroom tijdens een periode van 10 minuten. De
nominale inschakelduur van deze machine is 40 - 60 %. Een continu gebruik
van de machine met overschrijding van de nominale belasting kan tot een
oververhitting leiden, en een frequent gebruik met meer dan de nominale
belasting kan een overmatige slijtage veroorzaken, of zelfs de machine
verbranden.
2) Uitgangskenmerken
Externe kenmerk van maximale uitgang
- - - - - - - -
Externe kenmerk van minimale uitgang
_ _ _ _ _
Verhouding met nominale last
Inschakelduur
Uitgangskenmerken curven
5
1.6 System characteristics
Figure 1-4: Duty cycle
Figure 1-5: Output characteristic curves
1
)
Duty cycle
2
)
Output characteristics
External characteristic of maximum output
External characteristic of minimum output
Relationship with ratedload
Rated duty cycle refers to the percentage of the normal work time of the machine under rated
maximum current holding in the period when taking 10 minutes as a period. The rated duty cycle
of this machine is 40 -60% Using the cutting machine continuously overrunning the rated load
may lead to overheating of the machine, and frequently using the machine overrunning the rated
load may accelerate the aging of the machine or even burn the machine.
.
%
U (V)
2
U
0
(A)
2
I
0
CUT40 L131
CUT100 L201
(
)
(
)
CUT60 L204
CUT80 L205
(
)
(
)
Q(%)
100
(A)
I
80
60
40
20
150
120
90
60
30
0
①
④
② ③
①
②
③
④
copyrighted
document
- all
rights
reserved
by
FBC
