4.5 - GREEN MACHINE
™
- North America - Installation, Operation, Maintenance, & Troubleshooting Manual
Chapter 10: Operator Instruction Sheet
Page 194
10.4
Maintenance Switch
Alarm
•
When a Maintenance Switch Alarm is active on the Controller:
1. Maintenance Switch on the front of the Control Panel cover is turned OFF.
2. Turn the Maintenance Switch to turn ON.
3. After the Maintenance Switch is turned ON, the Maintenance Switch Alarm will
clear and the GREEN MACHINE can operate.
4. If the Maintenance Switch Alarm does not clear after it is turned ON, call your
GREEN MACHINE Authorized Service Contractor (ASC).
10.5
Overfill Alarm
•
When an Overfill is active on the Controller:
1. An Overfill has occurred at the station during a fuel drop.
2. The Overfill Alarm should clear 2-hours after the overfill clears. Check the Fuel
Management System to see if there is a UST overfill.
3. If the Overfill Alarm has not cleared in 24-hours, call your GREEN MACHINE
Authorized Service Contractor (ASC).
10.6
SD Card Alarm
•
The GREEN MACHINE will continue to operate if there is a SD Card Alarm.
•
When the SD Card Alarm is active on the Controller:
1. An SD Card is not installed in the Controller slot.
2. The SD Card write protection is ON.
3. When the SD Card is not inserted into the slot properly.
