4.5 - GREEN MACHINE
™
- North America - Installation, Operation, Maintenance, & Troubleshooting Manual
Chapter 11: Operator Training Guide
Page 208
11.3.6.1
How to Insert and Remove the SD Card into Unitronics PLC Slot
•
See Figure 11-6
shows how the SD Card is inserted into the PLC. Please note the orientation
of the SD Card.
•
To install, place the SD Card into the PLC slot, note the orientation of the SD Card.
•
CAUTION: Once the SD Card is partially inserted in the PLC slot, use your finger nail, not a
hard tool, to fully insert the SD Card into PLC slot.
•
To remove the SD Card from the PLC slot:
•
The SD Card can be removed from the PLC by using your finger nail and pressing the SD
Card in, releasing it and then pulling the SD Card out of the slot in the PLC.
Figure 11-6: Inserting and Removing the SD Card from the PLC