41
1. Use the
Up
and
Down
arrow buttons to select a recording to play
back. The alarm condition which caused the file to be recorded is
indicated in the list. For instance, in the screen shot shown here,
the letter
M
next to a file indicates that the file was recorded after
motion was detected by the camera. “
A
” indicates that the file was
recorded after a GPIO event. An asterisk (*) before the date
indicates that the file is locked.
2. Press the
OK
button to confirm. The chosen recording is played
back.
3. Press the
Display
button on the remote control to display various
properties of the recorded file. The date and time of recording are
displayed in the upper right corner.
• Progress
– A one hour time line is displayed at the bottom of
the screen with the moving orange line indicating the status of
playback.
• Recorded Data
– The aqua colored line represents how much of
the one hour time interval was recorded. A full blue line means
Playback
