16
• Max Conn. Bandwidth
– sets the maximum bandwidth allo-
cated for each connection to the
VP-580. This is the maximum
bandwidth divided by the maximum connections.
• Video Input
– sets the position of the camera input displayed on
your local screen. Changes to this setting will take effect only
after the system is rebooted.
• Water Mark
– Sets a water mark on the video image. This option
is available only for JPEG and MJPEG algorithms (see
Algo-
rithm
on page 35).
• Local Display
– enables viewing the selected camera video
signal on the local display. If this option is set to Off, the camera
is still optional and its video can be recorded if needed.
To change the video parameters:
1. Use the
Up
and
Down
arrow buttons on the remote control to
highlight the option.
2. Use the
Left
and
Right
arrow buttons to change the value assigned
to the setting.
3. Press the
OK
button to confirm the new settings.
Each camera has its own video screen. To move between the screens for
each camera, use the
Prev Page
and
Next Page
buttons on the remote
control.
System setup
