29
disable motion detection. If you want motion detection enabled
in the entire field of vision of the camera, leave the screen
completely red.
iii Press the
Cancel
button to return to the previous menu when
done.
6. Select the
Save
option and press the
OK
button to save all your
changes.
7. Use the
Prev Page
and
Next Page
buttons to move to the motion
detection menus for all connected cameras.
8. Press the
OK
button when settings are correct.
You need to provide E-mail details if you want an E-mail to be sent when
an alarm occurs.
To enter E-mail details:
1. Select the
option from the
Alarm
menu.
2. Press the
Right
button to confirm. The E-Mail submenu is
displayed.
3. In the
menu, use the
Up
and
Down
buttons to select a
field from the following:
• Addr
– Type the name of your mail server. See your network
administrator for details about the address of your mail server.
• Name
– Type your user name.
• Pass
– Type your password.
• Sender
– Type the e-mail address of the sender.
• Test
– Checks the validity of the provided E-mail address by
sending an E-mail.
4. Press the
Right
arrow button to confirm your selection.
5. Press the
Key Pad
button on the remote control to display the on-
screen keyboard.
System setup
