27
2. Use the
Left
arrow to decrease the value and the
Right
arrow to
increase the value for that field.
3. Press the
OK
button when the values are set correctly.
Note:
TheVP- 580 reboots to save the
changes, if you modify
the time zone.
3.3.13 Alarm
Use the
Alarm
menu to define what constitutes an alarm condition and how
the VP- 580 reacts when such a condition occurs. You can configure an
alarm condition to be generated when motion is detected by the camera, if
the video signal is lost from a camera, if the disk space is too low, if VP580
case was opened ,or if there is a disk error. Once the alarm is generated, you
can set the alarm notification through a beep, a message, a video popup,
voice call, or E-mail.
The Alarm menu has the following submenus:
• Motion Detection
– enables you to configure the motion detec-
tion parameters for each camera.
– enables you to set up an E-mail address and verify it is
working correctly.
• Video Popup (sec)
– sets the time for which a camera is dis-
played on your monitor when an alarm is generated.
• Voice Call
– enables you to set conditions that generate a voice
call when an alarm is triggered.
• Set Action
– sets the action that will generate an alarm condition
for each camera.
Note:
The
Voice Call
option will only be displayed in
System setup
