Extracted air filter
Fig. 37
Stale air is extracted from the inside through a filter located in housing at the top left.
Fig. 38
To remove the filter, open its housing as shown in the figure below.
Fig. 39
After opening the housing, simply pull out the filter by pulling it up with the corresponding tab.
To reinstall the filter, simply insert it in the corresponding housing, pushing it down to end stop and closing housing.
Annual checks
At least once a year, perform a visual inspection of general equipment conditions and wall mounting
Cleaning
To clean the outside surface of equipment, use only a soft, clean cloth, dampened with water or non-abrasive or aggressive
cleaning products if necessary.
47
ENGLISH
