30
ENGLISH
Installation
Preparing the installation site
Fig. 7 - Minimum spaces
The product should be installed on a wall and in a suitable location, that is in a place that allows for normal operation and
adjustment operations as well as routine and special maintenance.
It is therefore necessary to set up the operating space around the equipment for both the above operations and also for the
correct circulation of air flows
The premises must be equipped with a suitable electrical power line.
Connections to the outside
Fig. 8-9
Equipment requires two ducts to the outside. The channels will allow for the expulsion of exhausted room air and the wi-
thdrawal from the outside of renewed air.
CAUTION!: product installation, commissioning and maintenance must be performed by qualified,
authorised personnel. Do not attempt to install the product by yourself.
!
Model
X1
[mm]
X2
[mm]
Y1
[mm]
Y2
[mm]
HRW 60 HP MONO - B/W
500
500
500
500
7
X2
Y1
X1
Y2
Outside environment
Inside environment
8
Outside en
vir
onment
In
side en
vir
onment
9
