Series S34 Instruction Manual
Chapter 6 Troubleshooting and Repair
M-000-00030
6-8
Troubleshooting the Flow Meter
Warning!
Always turn off power and remove main power before disassembling any part of the flow meter.
First Check Items:
Installation Programming Correct
Installation Spacing Correct
Power and Wiring Correct
Application Fluid Correct
Meter Range Correct for the Application
Meter Configuration Correct
Describe Installation Geometry i.e. upstream diameters, valve
position, downstream diameters, etc.
Record Values:
Record the following values from the Run Menu with the meter installed in order to determine the
operating state of the flow meter:
With Flow
With No Flow
(if possible)
Flow =
Temperature=
Density =
Error Messages? =
Record the following values from the Hidden Diagnostics Menu with the meter installed:
(Use password 16363 to access.)
With Flow
With No Flow
(if possible)
Spd Sound Ratio =
Signal Quality =
Signal Strength =
V =
RTD1/RTD2 =
Firmware =
Sig. Elapsed Time =
Pulse Out +/- VDC =
Gain/Index =
Flight Time =
Summary of Contents for SonoPro S34 Series
