Series S34 Instruction Manual
Chapter 3 Operation
3-2
M-000-00030
Start Up
To begin flow meter operation:
1.
Turn on
POWER
to the meter. At start up, the unit runs a series
of self-tests that check the RAM, ROM, EPROM and all flow
sensing components. After completing the self-test sequence,
the Run Mode screens appear
.
2.
The Run Mode displays flow information as determined by
system settings. Some screens depicted on the next page may
not be displayed based on these settings. Press the
ar-
row keys to view the Run Mode screens.
3.
Press the
ENTER
key from any Run Mode screen to access the
Setup Menus. Enter the factory configured password 1234.
Use the Setup Menus to configure the meter’s multi
-parameter
features to fit your application.
Note
Starting the flow meter
or pressing
EXIT
will
always display the
Run Mode screens.
Summary of Contents for SonoPro S34 Series
