Series S34 Instruction Manual
Chapter 2 Installation
M-000-00030
2-6
loosen the two set screws on the top of each side bracket, slide the mounting
clamp slightly and then fit the transducer. Once the transducer is fitted, return the
mounting clamp to its original position (i.e. touching the end bracket connecting
the two rails) and tighten the two set screws. Tighten the screw with plastic knob
on the top of the mounting clamp so the end of the screw fits into the divot on the
top of the transducer.
7.
Tighten the chain using the thumb nut on the front adjustable hook so the rail fits
tight on the pipe.
8.
Tighten the screw with plastic knob on the top of the transducer mounting clamp
so the transducer fits tight on the pipe. Do not overtighten.
Figure 2-5. Spacing Locating Point on Large Rail/Fixture System*
*Note: Scale not shown here. Scale to be included with actual Large Rail/Fixture System
Summary of Contents for SonoPro S34 Series
