voptech GoIP User Manual Download Page 24 | Manualshive

Page: 24 / 71

background image

24

2. PPTP VPN – This option allows the device to create a VPN tunnel

with the designated VPN Server. The VPN protocol supported

is PPTP with no encryption or 40-bit encryption which is defined
on the VPN server. In general, this option is used to avoid VoIP
blockings.

3. PING – This option enables or disable the device to respond to a ping request.

5.3.3 Basic VoIP

The device can support both SIP and H.323 VoIP protocols. For GoIP-1, both protocol are embedded in one
firmware. User needs to select the VoIP protocol as shown below.

As more features are added, SIP and H.323 VoIP protocols are supported in two different firmware versions.

Except GoIP-1, all other models are now shipped with the SIP protocol firmware as a factory default. If
H.323 protocol is required, the firmware of the device can be changed to the one that supports H.323
protocol. Please visit our website for the latest firmware versions or contact us or your supplier for the

latest firmware upgrade links available.

In general, it is important to understand your VoIP application with the device before proceeding to device

configuration. If the device is going to work with a IP PBX, please make sure that you know how to configure
your IP PBX. It is very important that you send us your application requirements in full details when seeking
for technical support in configuring the device.

In order to simplify SIP configuration, SIP settings are categorized as Basic VoIP, Advanced VoIP and Media.
In general, Basic VoIP defines how the GoIP handle SIP calls and four SIP modes are supported.

It is

important to understand the differences between each mode in order to select a mode that is the most
suitable for your application. Depending on the SIP environment and network conditions, you may or may
not need to change the default settings in the Advanced VoIP and Media pages.

Once SIP settings are completed, it is important to configure the device for making outgoing calls and
receiving incoming calls. Please see section 3.3.6 and 3.3.7 for more information on Call OUT and Call IN

settings.

The four modes of SIP operations are described below.

«
...
22
23
24
25
26
...
»

Summary of Contents for GoIP








































































Reviews:

No comments

Related manuals for GoIP

Brand: Vega Pages: 39

NFS/DFS Secure Gateway

Brand: IBM Pages: 67

Brand: Top Global Pages: 75

Brand: Ubiquiti Pages: 22

CONTROLS Series

Brand: Condair Pages: 16

Brand: Lantronix Pages: 2

Brand: King Pigeon Pages: 52

Brand: King Pigeon Pages: 55

Brand: Planet Pages: 30

Brand: Rosslare Pages: 40

Bluetooth Gateway

Brand: Xlink Pages: 3

Brand: 2N Pages: 87

Brand: Xi an ZFE Pages: 14

Brand: Nortel Pages: 90

Brand: Gaoke Pages: 24

Brand: Lantronix Pages: 482

Brand: David Clark Pages: 12

Brand: MicroNet Pages: 126

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands