voptech GoIP User Manual Download Page 64 | Manualshive

Page: 64 / 71

background image

64

Appendix B. SMS To VoIP

The device receives SMS messages from both GSM and VoIP networks and they are handled according to the
modes defined below.

1. Call Function – In this mode, a received SMS is used to implement the “Call Back” function. The concept

is to establish a phone call between the called party and the calling party. The phone number of the
called party is specified in the GSM SMS message received. The phone number of the calling party is the

SMS sender’s number. The device then sends a SIP INVITE message containing these phone numbers to
the SIP Server registered. Three different SIP INVITE message formats are supported and are described
below.

a) Mode 1

SIP Message format:



The “To” field in the SIP INVITE message contains the phone number of the called party.



The “From” field contains the phone number of the calling party.

Once the SIP server receives these two numbers via a SIP INVITE message, it then terminates the SIP
call (SIP INVITE) and then call both parties via its own phone network. The device may or may not
take part in the actual call conversation.

Example:

SMS content = 8675588228822

Sender’s number = 861380000000
SIP Server IP = 192.168.2.1
SIP Number = 20001

The INVITE message sent to the SIP Server is:

INVITE sip:

8675588228822

@192.168.2.1:5060;transport=udp SIP/2.0

Via: SIP/2.0/UDP 192.168.2.237:5060;branch=z9hG4bK363969813
From: <sip:

8613800000000

@192.168.2.1:5060>;user=phone;tag=65248630

To: <sip:

8675588228822

@192.168.2.1>

Call-ID: [email protected]
CSeq: 2 INVITE
Contact: <sip:

8613800000000

@192.168.2.237:5060>

Max-Forwards: 30
User-Agent: Voptech
Allow: INVITE, ACK, BYE, CANCEL, OPTIONS, NOTIFY, REFER, REGISTER, MESSAGE, INFO, SUBSCRIBE
Content-Type: application/sdp
Content-Length: 226

b) Mode 2

SIP Message format:



The “To” field in the SIP INVITE message contains the phone number of the called party.



The “From” field contains the SIP number of the line that is associated with the GSM channel



Note: The VoIP configuration of the device must be set to “

Config. By Line mode

”.

Only the phone number of the called party is passed to the SIP server via a SIP INVITE message. This
mode is designed to use the GSM channel of the device to complete the Call Back function. Therefore,
the

Call OUT via GSM

parameter of the device must be enabled and the

Forward Number

associated

«
...
62
63
64
65
66
...
»

Summary of Contents for GoIP








































































Reviews:

No comments

Related manuals for GoIP

Brand: Matrix Telecom Pages: 32

BridgeX BX5020 GT Series

Brand: Mellanox Technologies Pages: 64

Brand: Grandstream Networks Pages: 54

LoRaWAN FMLR PicoCell

Brand: Miromico Pages: 8

CONTROLS Series

Brand: Condair Pages: 16

Brand: SpectraLink Pages: 2

Brand: Intermatic Pages: 6

Brand: Planet Networking & Communication Pages: 93

Fieldgate FXA720

Brand: Endress+Hauser Pages: 66

Brand: David Clark Pages: 11

Brand: David Clark Pages: 13

CT-100-SPLIT ROW

Brand: enphase Pages: 2

Brand: DLG Pages: 40

Brand: ATX Pages: 36

MiniHub Pro WLRRTES-102 TBMH110

Brand: Browan Pages: 14

Brand: GL-INET Pages: 2

Brand: SmartRG Pages: 66

Brand: Sensus Pages: 4

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands