voptech GoIP User Manual Download Page 46 | Manualshive

Page: 46 / 71

background image

46

11. SMS Alert Number

This specifies the GSM number to receive a SMS Alert on the Total Talk

Time. If this parameter is blank, no SMS Alert will be sent.

12. SMS Alert ID

This parameter is used to identify the channel sending the SMS Alert.

13. SMS Alert Trigger

(Remain Talk Time (m))

The Remain Time is the Total Talk Time Limit minus the total talk time

used.

When this Remain Time reaches the value set in the parameter, a

SMS Alert is sent to the SMS Alert Number automatically.

14. Hide My GSM Number

This parameter determines if the caller party can receive the phone

number of the caller or not.

Enabling this parameter hides My GSM

number from the called party.

This specified if the phone number of the caller is shown at the called

party or not.

5.3.11 SIM Forward

This section allows the user to define the GSM Call Forward settings for each channel. There are four Call
Forward conditions:
1. Always - Forward all incoming calls unconditionally
2. Busy - Forward all incoming calls when busy.
3. No Answer - Forward the incoming calls when it is not answered.
4. No Service - Forward all incoming calls when the SIM cannot register to the network.

There are 3 choices for each Call Forward condition.

1. Set - This enable the Call Forward function. This setting is sent to the network whenever the SIM is

starting a new registration to the network.

2. Disable - This disable the Call Forward function. This setting is sent to the network whenever the SIM is

starting a new registration to the network.

3. Not Set - This leaves the current SIM Call Forward setting in the network unchanged. The Call Forward

setting is NOT sent to the mobile network.

Parameter

(SIM Forward)

Description

Default Value

1. Unconditional Call

Forward



Forward Num

Forward all incoming calls unconditionally to the number specified.

This specifies the phone number to receive forwarded calls under this

condition.

Not Set

2. Call Forward Busy



Forward Num

Forward calls when the GSM Channel is in use.

This specifies the phone number to receive forwarded calls under this

condition.

Not Set

3. Call Forward No

Answer



Forward Num

Forward the call when an incoming call is not answered.

This specifies the phone number to receive forwarded calls under this

condition.

Not Set

«
...
44
45
46
47
48
...
»

Summary of Contents for GoIP








































































Reviews:

No comments

Related manuals for GoIP

Brand: ECKELMANN Pages: 34

Brand: IAI Pages: 5

Brand: RTA Pages: 74

Brand: SpectraLink Pages: 2

SmartRG SR808ac

Brand: Primus Pages: 2

Brand: Bpt Pages: 25

Fieldgate SFG500

Brand: Endress+Hauser Pages: 52

WirelessHART Fieldgate SWG70

Brand: Endress+Hauser Pages: 138

Brand: VBOX Pages: 40

Brand: Four-Faith Pages: 32

Brand: ELKOR Pages: 2

Brand: 2N Telekomunikace Pages: 105

Brand: 2N Pages: 9

Brand: 2N Pages: 57

Brand: 2N Pages: 67

Brand: Sensus Pages: 4

Brand: RCA Pages: 44

Brand: ZyXEL Communications Pages: 82

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands