43
Host Address
The Host Address field specifies the IP address of the device that contains the Host
channel. If a Client and its Host belong to the same device, its device IP is entered in this
parameter. A client registers and updates its channel status to the Host.
8. Auto Incoming Call
Block
Trigger
This option is used to block an incoming calls when the condition specified in the
Trigger
is met.
The block operation is released when an incoming call with a different Caller ID is received.
This sets the number of consecutive calls with the same Caller ID required to trigger the
Incoming Call Block function.
Disable
Note: The
*Auto Config. Other Line
button is provide to facilitate the programming of each channel. After the parameters for
CH1 are set, clicking this button automatically duplicates the CH1 settings to all other channels.
5.3.9 Call IN Auth
This page defines how incoming GSM calls are authenticated.
The Call IN Auth parameter is channel
dependent. First select the channel desired and then specify the authentication method.
Parameter
Description
Default Value
1. Call In Auth
This parameter defines how incoming GSM calls are authenticated before routing them to
the VoIP network connected. Five options are available:
1. None – No authentication is required; all incoming GSM calls are routed to VoIP.
2. Password – The caller is prompted for entering the password before the call is routed or
a second dial tone is generated.
3. Whitelist – Only calls with caller IDs that are listed on the Whitelist are accepted by the
GSM channel selected. Calls with GSM numbers not on the list are not answered at
all.
4. Whi Password – Both Whitelist and password are used to authenticate incoming
GSM calls.
5. Blacklist – Calls with caller IDs that are listed on the Blacklist are not answered by the
channel selected.
None
2. Whitelist / Blacklist
Call screen list can be set to Whitelist or Blacklist. A maximum of 15 entries is allowed.
1. Whitelist – This list contains a list of incoming GSM caller numbers that are accepted
(answering calls from these numbers only) by the device when Call IN Authentication is
set to “Whitelist” or “Whi Password”.
2. Blacklist – This list contains a list of incoming GSM caller numbers that are rejected (not
answering calls from these numbers) by the device when Call Authentication is set to
Summary of Contents for GoIP
Page 26: ...26 ...
