11
2. The RJ-45 port, labelled “LAN”, is intended for intranet or internet connection.
Depending on your
network environment, it can be connected various type of network equipment, such as network router,
network switch / Hub, xDSL/Cable modem, etc.
3. The RJ-45 port, labelled “PC”, is intended for network sharing and it supports both bridge and router
modes. In Bridge mode, the PC port is connected to the same network segment as the LAN port. In
Router mode, the PC port is set to a different network segment. In this case, please make sure that the
PC network segment IP (192.168.x.) is different from the one in the LAN port network.
4. The DC port is for power connection. Please use the AC/DC adapter provided. Using an adapter from a
difference vendor or with different ratings may damage the device or affect its performance.
5. The Reset button is recessed inside the device cabinet. Please use a sharp pointer to access the reset
button. Press it momentarily to reboot the device. Press it for 15 seconds or more to reset the device
settings including login password to its factory defaults.
Summary of Contents for GoIP
Page 26: ...26 ...
