16
overseas DNS server may solve the problem.
g) VPN Status - This shows the current VPN connection status. It only appears when VPN is enabled.
3.
Web Access Records
a) Last Client IP – This shows the IP address of the PC for the last web access.
b) Last Login Time – The shows the time when the last web access occurred.
c) Current Client IP – This shows the IP address of the PC for the current web access.
4.
Call Management section summarizes the both GoIP and GSM configurations and their corresponding
status. It is important to note that the VoIP lines and the GSM channels are not mapped to each other
as a one to one relationship. For outgoing calls (from VoIP to GSM), the GSM channel selection is
based on the
Routing Prefix
.
VoIP
a)
Line
- This is used as a reference in VoIP line configuration.
b)
Mode
- This shows the current VoIP Registration mode.
"
S
" means Single Server Mode.
"
L
"
means Config. By Line mode. "
Gx
" means Config. by Group mode where x is the group reference
number. "
T
" means Trunk Gateway mode.
c)
Login
- This shows the current VoIP registration status. "Y" means that the corresponding line
registers to the server successfully. "N" means the corresponding line fails to register to the server.
d)
Routing Prefix
- This shows the current setting for the Routing Prefix. If it is set, the Routing Prefix
is used to select the corresponding channel to dial out a call. Please refer to Section 3.3.3 for more
information.
GSM
e)
CH
- This corresponds to the physical GSM channel number.
f) Login -
This shows the current GSM Registration status for voice calls.
g)
Call In
- This shows the Call IN setting for the corresponding GSM channel. "
Y
" means incoming
calls are enabled. "
N
" means incoming calls are disabled and the corresponding channel rejects all
incoming calls by sending back the hangup ("ATH") command to the GSM network.
h)
Call Out
- This shows the Call Out setting for the corresponding GSM channel. "
Y
" means outgoing
calls are enabled and "
N
" means outgoing calls are disabled. When the
Remain Time
for outgoing
calls reaches
zero
, the Call Out setting is set to "
LOCK
" automatically. To unlock the channel, click
the corresponding [Reset] button in the
Summary
page.
i)
Remain Time
- This is the same as the "
Remain
" shown in the
Summary
page. If the
Talk Time
Limit
in the
SIM
Page is set, this parameter shows the remaining time allowed for outgoing calls.
5.2.3 GSM
The GSM page shows the current GSM channels status and information on the GSM modules and the SIM
cards inserted.
Summary of Contents for GoIP
Page 26: ...26 ...