Volvo KAD44P, Instruction Book

Page: 18 / 80

16
Control panel: Single engine, one control position
Control panel: Single engine, multiple control positions
Control panel: Twin engines, multiple control positions
Control panel
Various functions can be selected from the control
panel. The required function is activated or deacti-
vated by pressing the appropriate button. The buttons
have integral lamps which indicate the selection and
status of a particular function.
There are three different types of control panel,
which one(s) are installed depends on the number of
engines and control positions on the boat.
1. Neutral (green).
Light remains on: Indicates that the control lever
is in the neutral/idle position.
Flashing: Indicates that the control lever shift is
disengaged.
Selection: Press in the button to disengage the
control lever shift function. For further information:
See the section “Control”
2. Diagnostics (yellow).
Flashing: Indicates that an abnormal signal value
has been returned from the sensors on the en-
gine, control or other equipment.
Selection: A diagnostic trouble code (DTC) will be
displayed if the button is pressed in. For further in-
formation: See section “Fault-tracing”.
3. Active control station (red).
Light remains on: Indicates the control position is
active.
Flashing: Indicates that the control position can-
not be activated. For further information: See sec-
tion “Operation”.
Selection: Press button to select/activate a con-
trol position.
4. Synchronization (blue)
Light remains on: Indicates that the speeds of
the engines has been automatically synchronized.
Selection: Press button to engage/disengage au-
tomatic synchronization of engine speeds (func-
tion is always engaged when the engines are
started). For further information: See section
“Operation”.
1 2
NEUTRAL DIAGNOSIS
1 2
3
NEUTRAL DIAGNOSIS
ACTIVE
STATION
2
1
2
1
3
4
ACTIVE
STATION
DIAGNOSIS DIAGNOSIS
NEUTRAL SYNC NEUTRAL