Attachments, alternative
lowering
WARNING
Risk of crushing.
Incorrect function of the line rupture valves may
cause uncontrolled lowering of the attachment.
Do not enter under the attachment when working
with the alternative lowering function.
Even in technical incidents the attachment can be
lowered to the ground.
Lowering attachment using accumulator
pressure
In case of standstill or engine defect.
If the electric power circuit is available and the
accumulator is pressurized, it is possible to lower
the attachment with the control levers.
1 Insert the ignition key into the ignition switch and
turn it to running position / ignition.
2 Shift control lockout lever (4) to position (B). The
control levers for working and travel hydraulics
are unlocked (movement possible).
3 The control levers (see page
48
) can be used to
lower the attachment.
NOTE!
If lowering of the attachment is not possible
because the accumulator is depressurized, restart
the engine to pressurize the accumulator.
B
A
V1138066
4
Control lockout lever
V1087043
P
0
1
2
3
STOP
Ignition switch
P: Radio and cab interior light
0: Engine off
1: Running position / Ignition
2: Preheating
3: Start the engine
Operating instructions
Attachments, alternative lowering
81