Enter code screen
Use the keypad to enter the 4 digits anti-theft
code and confirm it with the SELECT button.
After the correct code is entered, the main screen
shows up.
If the engine is restarted 30 seconds after it was
turned off, the code does not have to be entered
again.
Recovery code screen
If the wrong code is entered more than 3 times, a
recovery code consisting of 5 digits appears. Note
down this code and contact your Volvo Construction
Equipment dealer.
Anti-theft system: code change
The anti-theft screen appears when pressing arrow-
down nine times from the main screen.
In this menu the anti-theft system can be enabled
or disabled and the 3 possible codes can be
changed.
Change primary code
Press SELECT when the main screen is shown.
Select the first code and press SELECT to
change this code.
Enter the old primary code and press SELECT.
Enter the new code and press SELECT.
Repeat the new code and confirm with SELECT.
A confirmation screen appears for 2 seconds if
the old code is correct and the new code is
correctly repeated.
If the old code or the new code are incorrect, the
change screen is shown again.
Change secondary code
Press SELECT when the main screen is shown.
Select the second code and press SELECT to
change this code.
Enter the old secondary code and press SELECT.
Enter the new code and press SELECT.
Repeat the new code and confirm with SELECT.
A confirmation screen appears for 2 seconds if
the old code is correct and the new code is
correctly repeated.
If the old code or the new code are incorrect, the
change screen is shown again.
0 _
*
_
V1138793
0 _
*
_
V1138794
1 0 8 6 0
V1138787
_ _ _ _
_ _ _ _
0 _
*
_
V1138788
*
*
*
*
*
*
* * * *
*
*
1
_ _ _ _
_ _ _ _
0 _
*
_
V1138789
*
*
*
*
*
*
* * * *
*
*
2
Instrument panels
Display unit
41