8 Overload warning function activated
(green) (optional equipment)
This lamp lights up if the overload warning function
is activated.
NOTE!
Stop lifting immediately and reduce the load if the
overload warning in the display appears
accompanied by the auditory warning signal in the
cab and the central warning lamp (1).
The overload warning (option) can be activated and
deactivated with a button on the keypad (see page
43
).
9 Engine oil pressure low (red)
This lamp lights up if the engine oil pressure is too
low.
NOTE!
Shut down the engine if this lamp lights up and
contact a workshop authorized by Volvo
Construction Equipment.
10 Attachment bracket open (red)
This lamp lights up if the attachment bracket is
open.
WARNING
Risk of crushing.
If the red warning lamp for open attachment bracket
lights up while working, the attachment could fall off
and cause serious crushing injury or death.
Stop working with the machine immediately and
make sure the attachment bracket is properly
locked before starting to work again.
11 & 12 Regeneration symbols (yellow) — not
applicable for ECR50D
These two lamps are not applicable for the
ECR50D, they appear at every machine start and
disappear again after 2 seconds.
13 Power socket
The power socket is used for electrical devices such
as a mobile phone charger or to supply electricity to
a lamp.
(Voltage: 12 V / Capacity: 10 A / Power: maximum
120 watt)
V1128179
V1077662
V1077663
V1138627
V1138628
30
Instrument panels
Display unit