PT?
SB?
Tachometer configuration
Perform.step.5–7.for.single.installation.alt..step.8–10.
for.twin.installation.
Single installation (step 5–7)
5.. The.tachometer.display.will.read.“
PT?”..
Confirm.by.pushing.NAVIGATION.WHEEL.
6.. Wait.until.“
PTIS”.disappears.from.tachometer.
display.and.MAIN.MENU.appears.
7.. Auto.configuration.is.finished.
Twin installation (step 8–10)
8.. One.of.the.tachometer.displays.will.read.“
PT?”.
(port.engine)...
If this tachometer is connected to port en-
gine:.Confirm.by.pushing.NAVIGATION.WHEEL.
.
If not:.Use.BACK.BUTTON.to.move.“PT?”.to.the.
corresponding.tachometer.display..Confirm.by.
pushing.NAVIGATION.WHEEL..
.
“
PTIS”.is.shown.in.display..
9.. The.other.tachometer.display.will.read.“
SB?”.
(starboard.engine).Confirm.by.pushing.NAVIGA-
TION.WHEEL..
.
“
SBIS”.is.shown.in.display.
10.. Wait.until.“
PTIS”/”SBIS”.disappers.from.tachom-
eter.display.and.MAIN.MENU.appears..
NOTE! Additional helm station
Repeat.step.5–7.or.8–10.for.each.additional.helm.
station.
11.. Auto.configuration.for.port.engine.is.finished..
Turn.starter.key.to.position.
0.(ignition off).
Starboard engine
Repeat.step.1–4.for.the.starboard.engine.(
port en-
gine - ignition off)
NOTE!.No.information.will.be.presented.in.the.ta-
chometer.display.window.during.auto.configuration..
The.procedure.may.take.
several minutes...When.
the.auto.configuration.is.finished,.the.system.returns.
to.MAIN.MENU.(indicated.by.NEUTRAL.BUTTON.
LED).
Auto configuration
EVC system display
Auto.configuration.is.the.EVC.system.self-identifica-
tion..Auto.configuration.should.be.performed.when.
the.system.is.started.for.the.first.time.or.after.system.
updates.
NOTE!.A.twin.installation.requires.one.auto.configu-
ration.to.each.engine..
Start with port engine.
IMPORTANT!.In.a.twin.installation,.when.using.
one.combined.EVC.system.display,.the.display.
must.be.configured.as.“
TWIN”.before.auto.con-
figuration.is.performed.
.
In.a.twin.installation..when.using.two.EVC.sys-
tem.displays,.the.displays.must.be.configured.as.
“
PORT”.resp..“STARBOARD”.before.auto.con-
figuration.is.performed.
1.. Turn.starter.key.to.position.
I.(ignition on)...
Twin installation:.Start.with.port.engine.(star-
board engine - ignition off)..
2.. Enter.calibration.mode.
3.. Push.and.hold.BACK.BUTTON.and.MULTI-
FUNCTION.BUTTON.until.buzzer.signal.and.
LEDs.light.up.
.
Release.buttons.
4.. Self.identification.and.software.download.starts..
The.procedure.may.take.
several minutes.de-
pending.on.software.download.to.the.EVC.sys-
tem.display.
NOTE!.The.EVC.system.starts.to.download.software.
to.all.tachometers.followed.by.the.EVC.system.dis-
plays..When.downloading.software.no.information.
will.be.presented.in.the.displays.and.all.LEDs.are.off..
If.the.displays.have.never.been.used.the.text.“
UP-
LOADING DATABASE”.will.appear.on.the.displays..
5.. .When.the.auto.configuration.is.finished,.the.sys-
tem.returns.to.MAIN.MENU.(indicated.by.NEU-
TRAL.BUTTON.LED).
Twin installation
Repeat.step.1–5.for.the.starboard.engine.(
port en-
gine - ignition off)...When.the.auto.configuration.is.
finished,.the.system.returns.to.MAIN.MENU.(indi-
cated.by.NEUTRAL.BUTTON.LED).
85
EVC-C.
Calibration.and.settings
Summary of Contents for EVC EC -C
