VOLUMIC STREAM MK3 Series User Manual Download Page 31

Page: 31 / 70

User Manual

Stream MK3/SC2/SH65 series

VOLUMIC • 12bis Rue Louis GARNERAY 06300 NICE • Tel: +33 (0)9 500 27 400 • Email: [email protected] • Web:www.volumic3d.com

page |30|

SETUP

–

Lighting

Settings page for the different ergonomic functions:

(*) The logo displayed on the screenshots may vary, but the content remains the same on all models.

Screensaver: Enables/disables the screensaver for energy saving and against LCD marking.

Light Alerts: Enable/disable Printer lighting colors change to notify a status.

Screen Brightness: Adjusts the overall screen brightness from 1 to 100%.

Screen saver delay: Sets the screen saver activation time when the machine is idle. The watch goes
as follows:

•

At standby time, the screen displays the standby page and the lighting flashes slowly

•

At the x2 delay, the screen displays the moving Volumic logo and completely turns off the
lighting

•

At delay x3 the brightness of the LCD screen is divided by 5

•

At delay x4 the brightness of the LCD screen is divided by 9

•

At delay x5 the brightness of the LCD screen is divided by 12

•

At delay x6 the brightness of the LCD screen is divided by 20

Idle LED Color: Sets the color of the illumination when the machine is not printing.

Printing LED Color: Sets the color of the lighting when the machine is printing.

Finished Job LED Color: Sets the color of the light when the machine has finished printing.

Summary of Contents for STREAM MK3 Series







































































Search results

Summary of Contents for STREAM MK3 Series

Reviews:

Related manuals for STREAM MK3 Series

Brands by name

Popular brands

VOLUMIC STREAM MK3 Series, User Manual

Search results

Summary of Contents for STREAM MK3 Series

Reviews:

Related manuals for STREAM MK3 Series

Brands by name

Popular brands