5.Use the Arbitrary Function Generator (Optional)
90
5.
Use the Arbitrary Function Generator
(Optional)
The function generator provides 4 basic waveforms (sine, square, ramp, and pulse) and 46
built-in arbitrary waveforms (Noise, Exponential rise, Exponential fall, Sin(x)/x, Staircase,
etc.). You can create a user-definable waveform and save it to internal storage or USB
device.
Output Connection
Push the
Utility
button, select
Function
in the bottom menu, select
Output
in the left
menu. In the bottom menu, select
Output
, in the right menu, select
AG Output
.
Single-channel:
Connect the BNC cable to the port marked
Out
in the back of the oscilloscope.
Dual-channel:
Connect the BNC cable to the port marked
Out 1
or
Out 2
in the back of the oscilloscope.
Out 1
is the output of CH1,
Out 2
is the output of CH2, also can be used as the port of
trigger signal output & Pass/Fail output.
To see the output of the generator, connect the other end of the BNC cable to one of the
input channels on the front of the oscilloscope.
To Set Channels
Single-channel:
Push
to turn on/off the channel output. The indicator will be lighted when the
corresponding channel is tuned on.
Dual-channel:
To Switch Channels in Menu Settings
Push
button to switch between
CH1
menu,
CH2
menu, and
Channel Copy
menu.
To Turn On/Off Output of Channels
Push
or
to turn on/off output of the corresponding channel. The indicator
will be lighted when the corresponding channel is tuned on.
Channel Copy menu
Push
button to switch to
Channel Copy
menu.
