4.Advanced User Guidebook
82
How to Measure with Cursors
Push the
Cursor
button to turn cursors on and display the cursor menu. Push it
again to turn cursors off.
The Cursor Measurement for normal mode:
The description of the
cursor menu
is shown as the following table:
Function
Menu
Setting
Description
Type
Voltage
Time
Time&Voltage
AutoCursr
Display the voltage measurement cursor and menu.
Display the time measurement cursor and menu.
Display the time and voltage measurement cursor
and menu.
The horizontal cursors are set as the intersections of
the vertical cursors and the waveform
Line Type
(Time&Vol
tage type)
Time
Voltage
Makes the vertical cursors active.
Makes the horizontal cursors active.
Window
(Wave
zoom
mode)
Main
Extension
Measure in the main window.
Measure in the extension window.
Line
a
b
ab
Turn the
M
knob to move line a.
Turn the
M
knob to move line b.
Two cursors are linked. Turn the
M
knob to move
the pair of cursors.
Source
CH1 to CH4
Display the channel to which the cursor
measurement will be applied.
Perform the following operation steps for the time and voltage cursor measurement
of the channel CH1:
1.
Push
Cursor
to display the cursor menu.
2.
Select
Source
in the bottom menu, select
CH1
in the right menu.
3.
Select the first menu item in the bottom menu, the
Type
menu will display at
the right of the screen. In the right menu, select
Time&Voltage
for Type,
two blue dotted lines displayed along the horizontal direction of the screen,
two blue dotted lines displayed along the vertical direction of the screen.
Cursor measure window at the left bottom of the screen shows the cursor
readout.
4.
In the bottom menu, select
Line Type
as
Time
to make the vertical cursors
active. If the
Line
in the bottom menu is select as
a
, turn the
M
knob to move
line a to the right or left. If
b
is selected, turn the
M
knob to move line b.
5.
In the bottom menu, select
Line Type
as
Voltage
to make the horizontal
cursors active. Select
Line
in the bottom menu as
a
or
b
, turn the
M
knob to
