68
r) Capacity Measurement
• Move the setting wheel (7) to the icon for capacity measurement “ ”.
Make sure that all circuit parts, circuits and components and other objects of
measurement are disconnected from the voltage and discharged.
Always observe polarity, e.g. with electrolyte capacitors!
• Connect the measuring lines to the current injection probe.
• Measure with the measuring lines at the object to be measured. (Red = Plus pole,
Black = Minus pole).
„DISC“ is displayed while the capacitor discharges (= „Discharging“).
• The value is indicated on the LC display.
• Remove the measuring lines from the object to be measured after the measurement and
switch off the current injection probe. For this, turn the setting wheel (7) into the position
“OFF”.
