background image

 

MASTECH®  

 
 
 
 

MS6813 

Multi Function Network Cable Tester 

 
 
 

Users Manual 

Table of Contents 

LIMITED WARRANTY AND LIMITATION OF LIABILITY .................................................................. 1 

Out of Box ....................................................................................................................................................... 2 
Safety Information ........................................................................................................................................ 2 
Using the Tester ............................................................................................................................................. 3 

1. 

INTRODUCTION .................................................................................................................... 4 

1.1 

MS6813 Features ..................................................................................................................... 4 

1.2 

Components and Buttons ...................................................................................................... 5 

2. 

USING THE TESTER................................................................................................................ 8 

2.1 

Network Cable Testing ........................................................................................................... 8 

2.1.1 Error Indicator ............................................................................................................................. 8 
2.1.2 Test Mode....................................................................................................................................... 9 
2.1.3 Debug Mode ...............................................................................................................................10 

2.2 

Coaxial Cable Testing ...........................................................................................................11 

2.3 

Continuity Testing .................................................................................................................11 

Summary of Contents for MS6813















Reviews: