59
14. Technical data
Display ..............................................................4000 Counts (digits)
Measuring rate ..................................................approx. 2 - 3 measurements/second
Measurement method V/AC, A/AC ...................True RMS (real effective value measurement)
Test lead length ................................................approx. 90 cm
Measuring impedance ......................................≥10 MΩ (V range)
Current clamp opening .....................................max. width 5.5 mm, max. height 13 mm
Measurement socket spacing ...........................19 mm
Automatic power-off ..........................................after 15 minutes (can be disabled)
Power supply ....................................................2 micro batteries (1.5 V, AAA or LR03)
Current consumption ........................................nominal approx. 9 mA,
max. 70 mA (continuity test / display illumination)
Standby (automatic power-off) approximately 0.5 μA
Battery change indication .................................≤2.6 V
±
0.1 V, power-off at ≤2.1 V +/- 0.1 V
Working conditions ...........................................0 to +28 °C (≤95% RH non-condensing)
+29 to +40 °C (≤75% RH non-condensing)
+41 to +50 °C (≤45% RH non-condensing)
Operating altitude .............................................max. 2000 m
Storage conditions ............................................-10 to +50 ° C, max. 80% RH
Weight ..............................................................approx. 134 g
Dimensions (LxWxH) ........................................182 x 51 x 34 (mm)
Measurement category .....................................CAT II 600 V, CAT III 300 V
Pollution degree ................................................2
Meets ................................................................EN 61010-1, EN 61010-2-032 and EN 61010-2-033 safety regulations
EN 61326-1; EN 61326-2-2
1
Measuring tolerances
Accuracy in
±
(% of r display error in counts (= number of smallest points)). The accuracy is valid for one
year at a temperature of +23 °C (
±
5 °C), and at a relative humidity of less than 75 %, non-condensing. Temperature
coefficient: +0.1 x (specified accuracy)/1°C
The measurement may be impaired if the device is operated within a high frequency, electromagnetic field strength
> 1V/m. At an electromagnetic field strength <1V/m, a tolerance of +5% must be applied to all specified areas.
