RNS 310, RNS 315
Function buttons and device buttons
Fig. 2
RADIO main menu with pop-up window.
Please first read and observe the safety in-
structions
on page 3 and the introduc-
tory information on page 8.
The device is equipped with a touch screen.
The menu that is currently selected is displayed In
the middle of the bottom screen line.
Controls
•
Rotary and push buttons.
•
Labeled
device buttons
.
•
Function buttons
on the device.
•
Function buttons
shown on the screen.
Rotary and push buttons
The left rotary and push button
⇒
page 6,
fig. 1
is designated Volume control
or On-Off switch.
The center rotary and push button
⇒
page 6,
fig. 1
is designated Tuning knob.
Device buttons
Buttons on the device are identified in this manual
as “buttons” and are represented as a symbol with
blue content , for example
button.
Underneath the screen are two unlabeled device
buttons
⇒
page 6,
fig. 1
. Operation and func-
tion correspond to the respective function buttons
⇒
fig. 2
and shown at the top of the screen.
Device buttons are operated by
pressing
or
holding
.
Function buttons on the screen
Active areas of the screen which represent a func-
tion are labeled as “function buttons” and are op-
erated by a brief
press
on the screen or
holding
.
Function buttons are described in the manual as
“function button” and with the button symbol.
A function button that is grayed-out cannot be se-
lected, e.g. .
Pop-up window
A “pop-up window” is a small window
that ap-
pears for a short time prior to the current menu
and contains additional function buttons.
A function button in a pop-up window can be ac-
cessed by pressing it. The pop-up window then
closes.
Press the
button in order to close the pop-up
window without a change.
Launching or activating functions using the
“checkboxes”
Some functions are started or stopped by pressing
the related button, for example the Scan function
⇒
page 14.
Other functions or displays are permanently acti-
vated or deactivated and are marked with a
checkbox.
A check mark in a checkbox
indicates that the
function is activated, an empty checkbox
, that
it is deactivated.
Functions activated via checkboxes can only be
deactivated by opening the pop-up window again
and deactivating the checkbox.
Selecting function buttons via the tuning knob
With the exception of the two lower function but-
tons and , function buttons that are shown
in the display can also be selected by turning the
tuning knob
⇒
page 6,
fig. 1
. Pressing accesses
the respective function button
⇒
page 11.
A
1
A
10
...
RADIO
A
11
A
A
A
C
...
A
C
A
B
A
A
A
C
A
10
Navigationssystem_111.5U6.N31_23.book Seite 10 Donnerstag, 22. April 2010 5:16 17
