RNS 310, RNS 315
Basic operating instructions
Introduction
In this section you’ll find information on the fol-
lowing:
Switching on or off . . . . . . . . . . . . . . . . . . . . . . . . . . .
Changing the default volume . . . . . . . . . . . . . . . . . .
Additional displays and options . . . . . . . . . . . . . . .
Function buttons and device buttons . . . . . . . . . . . .
Browsing lists and selecting items . . . . . . . . . . . . . .
When settings are changed, the device characteris-
tics might be different from what is described in
this manual. Therefore Volkswagen recommends
that you reset the device to the its
Factory settings
prior to first use
⇒
page 67.
Supplementary information:
•
Safety instructions
⇒
page 3
•
Device overview
⇒
page 6
•
Multi-function steering wheel to change tracks
or stations
⇒
Booklet
Owner's manual
, chapter
Vehicle overview
A light keystroke or tap on the touch screen is
sufficient to operate the device.
Never hold a button for longer than 10 min-
utes. Otherwise, the device will interpret this
as a malfunction (
jammed key
).
Due to country-specific legal requirements,
some functions are not selectable on the
screen above a certain driving speed.
Operating a mobile phone in the vehicle can
cause noise in the speakers.
In some vehicles with park distance control,
the volume of the current audio source is au-
tomatically reduced when shifting into reverse.
Some countries may have restrictions re-
garding the use of Bluetooth devices. Infor-
mation can be obtained from the local
authorities.
Switching on or off
Please first read and observe the safety in-
structions
on page 3 and the introduc-
tory information on page 8.
Press the rotary and press button
⇒
page 6,
fig. 1
to switch the device on or off manually.
After being switched on, the system will resume
play of the most recently used audio source.
When the motor is turned off, the device will
switch itself off automatically after about 30 min-
utes (timeout).
Anti-theft coding
The anti-theft code number remains stored in the
vehicle after initial input (convenience radio
coding). Only if the device is installed in a different
vehicle does the anti-theft coding have to be can-
celled manually. When the device is switched on, a
keypad pops up requesting the code. Please con-
tact your Volkswagen dealer in this case.
If the vehicle battery has been disconnected,
please switch on the ignition before switching the
device back on.
8
9
9
10
11
A
1
Navigationssystem_111.5U6.N31_23.book Seite 8 Donnerstag, 22. April 2010 5:16 17
