RNS 310, RNS 315
Media settings menu(SETUP)
Please first read and observe the safety in-
structions
on page 3 and the introduc-
tory information and safety instructions
on
page 21.
In Media mode, press the
button in order to
open the
Media
Setup menu
. The choice of setup
options depends on the device and equipment
and other accessories.
Adjusting the playback volume
Lower the default volume of the radio system be-
fore turning up the volume on an external audio
source
⇒
page 9.
If the connected audio source is played back
too
softly
, increase the
output volume
of the external
audio source, if possible. If this is not sufficient, in-
crease the
input volume
.
If the connected external audio source is played
back
too loudly or the sound is distorted
, lower the
output volume
of the external audio source, if pos-
sible. If this is not sufficient, decrease the
input
volume
.
WARNING
Excessively high volume settings may lead to
hearing loss. This can also extend to short expo-
sure of the ears to loud volumes.
Note
Excessively loud or distorted playback can
damage the vehicle speakers.
: The tracks of the current folder are repeated at the end.
Random playback and the repeat function stay activated for the respective media source until they are
deactivated.
Function button: Effect
Repeat folder
SETUP
Function button: Effect
: subfolders are also affected by the chosen playback mode
⇒
page 29.
This setting must be configured before making changes to the playback mode.
: Adjust the
input volume
of an external audio source connected via the AUX-IN socket
⇒
page 6,
fig. 1
to equalize it with the
playback volume
of other audio sources
⇒
page 25.
: Adjust the
input volume
of an iPod
®
or an iPhone
®
connected via the MEDIA-IN multi-
media interface to equalize it with the
playback volume
of other audio sources
⇒
page 31.
a)
or
a)
: Audio files stored on an external audio source which is con-
nected to a factory-installed mobile phone package via Bluetooth
®
can be played back via the vehicle
speakers
⇒
page 26.
a)
: Adjust the
input volume
of an external Bluetooth audio source to equalize it with the
playback volume
of the other audio sources.
a)
The available functions vary from device to device.
Scan/Mix/Repeat incl.
AUX volume
A
9
MDI volume
Activate BT audio
BT audio autoplay
BT audio volume
Navigationssystem_111.5U6.N31_23.book Seite 30 Donnerstag, 22. April 2010 5:16 17
