G-700
50
13.5 [Setting]
13.5.1 Audio [Mute]
13.5.2 Frame Lock and Smooth Switching Mode
[Frame Lock] will ensure the input and output frame rate synchronize together. When the application uses
multiple GeoBox, the signal in each GeoBox will also have better synchronization without frame tear.
However, when the input timing change or video source have been changed, the output signal will be
broken for short time temporarily and it will cause display devices to re-search input source and no video
image will be displayed during that time. If user wants to eliminate this kind of waiting time, user can
[Disable] frame lock to maintain continuous output in GeoBox while input source or timing changes. This
kind of Smooth Switching Mode is only available when the signal change is in same vertical frequency, such
as within NTSC or Pal. If the input timing change is between NTSC or PAL, there will be still temporary
There are 4 items under [Settings] menu:
[Mute] Audi mute or enable
[Box ID]: Set control ID
[Profile]: Save profile settings
[Network]: set RS232 and network control
Audio Mute:
[Mute Off] will enable audio output.
[Mute On] will disable audio output.
[Mute] hot key in remote controller is
available
If it is set to “60”, G-700 will automatically
turn off output signal when no input signal is
detected for 60 seconds.
If the projector can also automatically shut
down when no input signal is detected.
User only needs to control signal source to
turn ON/OFF the system.
