Vnstw G-700 Operation Manual Download

Page: 17 / 62

G-700

6.10 Active 3D and passive 3D display

User can use one G-702 as 3D de-multiplexer to decode HDMI 1.4 3D signal or active 3D frame sequential

100/120Hz signals for passive 3D display using two projectors. This kind of passive 3D application can be

applied to bigger screen through edge blending with one G-704 and 4x projectors. User can also increase

brightness in 3D system through image stacking with more projectors.

User can convert Nvidia 3D Vision 1080p 120Hz 3D signal and 1080p/24Hz frame packing 3D from Blue

Ray into 720p/XGA/WXGA 100Hz/120Hz frame sequential 3D signal for DLPLink 3D Ready projectors.

Besides 3D format conversion, GeoBox can also apply geometry alignment for active 3D curved screen

display. If user wants to implement active 3D edge blending, user can’t use color wheel synchronization

system in DLP 3D Ready system and needs to find a method for the synchronization of multiple projectors

because the color wheel in multiple projectors can’t be synchronized. 1080p 24Hz frame packed 3D signal

will be converted into 720P 120Hz output but not 1080p 24Hz frame packed 3D format output.

Summary of Contents for G-700































































Search results

Summary of Contents for G-700

Reviews:

Related manuals for G-700

Brands by name

Popular brands

Vnstw G-700, Operation Manual

Search results

Summary of Contents for G-700

Reviews:

Related manuals for G-700

Brands by name

Popular brands