UD101L User Guide Document: UD101L-2
----------------------------------------------------------------------------------------------------------------------------- ---------------
8
➢
PIP/POP is integrated in each processing channel. However, only one HDMI input signal can
be selected in PIP/POP application. Please see more details in PIP/POP section.
➢
If the output refresh rate is not the same as input refresh rate. The frame lock function will be
disabled and it may cause not synchronization issue in multiple unit application. If the input is
4k/30 with FHD/60 output, it will have no synchronization problem. If the input is 50Hz, please
select 1080p 50 Hz output to avoid frame repeat issue.
➢
User can click [Info] key to get system information and input / output signal resolution.
2.2.
LED indicators
➢
LED indicators will show the input/output signal status.
➢
If user presses Menu key for 5 seconds on the remote controller, GeoBox OSD menu will be
locked and the Power LED will be flashing. To press another 5 seconds, it will unlock OSD
menu.
➢
If multiple units are used in the system, user can set different ID and use remote controller [85x]
key to execute independent control. Press [851] following other OSD keys, the remote
controller can only show Box ID #1 OSD and Power LED on front panel in other units will be
flashing. User can disable OSD LOCK with [850] command via IR controller.
Select input port and output
resolution.
LED indicator for input
port
LED indicator for output
port
Power on/off indicator
