![VNS UD101 User Manual Download Page 22](http://html1.mh-extra.com/html/vns/ud101/ud101_user-manual_1043368022.webp)
UD101L User Guide Document: UD101L-2
----------------------------------------------------------------------------------------------------------------------------- ---------------
21
3.2.1. PIP [Size] and [Position]
- PIP image size is from 320*180 to 1920*1200.
- It can be further adjusted through Overlap function to get about 160*90 image size.
- User can replace main image with sub-image on entire display under FHD output resolution.
- The PIP image position can be at any location with pixel by pixel adjustment through [Overlap] function.
- PIP image in each channel is independent. It is only inside one monitor but not across multiple monitors.
- If one PIP image across multiple monitors (video wall) is required, user can use one channel as front end to
implement PIP function, then connect the output to the input port in video wall controller to get it.
3.3. POP and 3 split view and 4 split view MultiViewer function
-
POP to fit full screen or maintain original source aspect ratio.
-
[SBS]: Side by Side display with monitor at landscape position.
-
[Top/Bottom]: Top/Bottom display with monitor at portrait position.
-
[SBS 2/1]: 2/3:1/3 side by side display with monitor at landscape position
-
[POP3]: One image at LH side and top/bottom two images at RH side in landscape monitor.
-
[POP4]: One image at Top and two images at bottom in landscape monitor.
-
[3X SBS]: Three split views at landscape
-
[3X T/B]: Three split views at portrait.
-
[4x Split]: Four split view multi-viewer. (only in monitor at landscape direction)
-
POP function is independent in each channel. One G904 can display 7 contents in one 4k monitor.
-
[Overlap] adjustment is not available in 3/4 split view function.
3.4. Aspect ratio adjustment
-
POP image
aspect ratio selection:
✓
Main Image: can be selected through [Scaling] under [Image Properties].
✓
Sub-Image: can be selected through [Ratio] OSD menu under [PIP Settings].
-
Further aspect ratio adjustment can be executed through Overlap function.
Independent aspect ratio in main and sub-images