UD101L User Guide Document: UD101L-2
----------------------------------------------------------------------------------------------------------------------------- ---------------
13
2.8.
Color adjustment
2.8.1. Global color adjustment: [Picture]
2.8.2. Preset Color Temperature and independent RGB color adjustment
2.9.
OSD Lock and unlock
➢
If multiple units of GeoBox is installed together or the IR receiver is put together, in order to
avoid interference among multiple GeoBox during the installation, user can set different ID
number for each GeoBox through [Options] Menu. Press number keys in Remote Controller to
determine which GeoBox will be controlled.
- 851: control GeoBox ID No. 1
- 853: control GeoBox ID No. 3
- 850: to unlock all units and user can control all GeoBox.
- User will see flashing LED on front panel after press 85x number keys. It means the OSD
menu in GeoBox with flash LED is locked and will not be controlled by remote controller.
-
[Picture] can execute below color
adjustment for each processing channel.
-
When input is 4:2:2 video:
[Brightness], [Contrast], [Hue],
[Saturation] & [Sharpness]
-
When input is RGB 4:4:4:
[Brightness], [Contrast] & [Sharpness]
-
[Color] under [Image Properties] menu
can change preset color temperature and
discrete [RGB] color in each channel.
-
[Preset Mode]: [Neutral], [Reddish],
[Bluish]
-
[Custom]: discrete RGB color adjustment
