UD101L User Guide Document: UD101L-2
----------------------------------------------------------------------------------------------------------------------------- ---------------
33
Five different display settings can be saved to [Profile]. The data stored in Profile include EDID
setting, input source, output resolution, color settings and all user customized settings.
When user power off the system, UD101L will save user setting without loss even the setting is not
saved into Profile Index, unless someone to change it.
When system has been reset from OSD menu or update new Firmware, Profile data will be still kept
inside UD101L.
Hotkeys for Profile [Save] and [Load]
8. WebGui and Gwarp3 PC tool (Not yet ready)
➢
WebGui is embedded inside GeoBox. Once user connects GeoBox through Ethernet IP address,
user can see virtual key for the operation.
➢
Gawrp3 is standalone PC tool that can be downloaded from VNS Website. It is HID interface and
can be controlled through USB or Ethernet. No software driver is required.
8.1. WebGui
➢
WebGui is embedded inside M800. Once user connects M800 with PC through Ethernet, user
can access WebGui and execute all operation similar to OSD menu through Virtual Keys and
OSD Menu. No PC or appropriate software tool is required.
➢
The connection can go through Ethernet router LAN port, WiFi Router or Crossover Cat 5/6
cable. User can set each M800 with different static IP address in the same domain, then open
Google Chrome or Microsoft Explorer browser with IP address to access each unit of M800 for
independent operation. There is no limitation in the number of M800 that can be controller at the
same time.
➢
User can turn on/off the system through WebGui and see the status through power indicator.
Press [Profile] hotkey, then select number
keys on the remote control (not through OSD
direction keys) to [Load] user settings
Press [Save], then select
[Index #] and press [Enter] to
save settings.
Number keys for
Profile [Load]
