UD101L User Guide Document: UD101L-2
----------------------------------------------------------------------------------------------------------------------------- ---------------
5
lines or horizontal lines simultaneously. The major purpose for this function is to smooth the gaps in
image horizontal or vertical lines in curved screen display. Usually, user will see smaller grid line size
at both sides of the curved screen. User can use this function to let all grid lines with the same gap to
get smooth image.
➢
Embedded test pattern grid size is editable from 8-120 pixels in both H&V directions.
➢
User can select different color in the test patten and can also apply external test pattern from signal
source.
C. High end 10-bit video processing
➢
10-bit high end processor with 3D motion adaptive de-interlace, low angle smooth algorithm and
3:2/2:2 film mode detect and recovery function.
➢
Complete color adjustment function, including brightness, contrast, hue, saturation, preset color
temperature and independent RGB gain adjustment.
D. PIP/POP, MultiViewer
➢
[PIP]: Picture in Picture display with any two inputs in each channel.
➢
[SBS]: Side by Side display with monitor at landscape position.
➢
[Top/Bottom]: Top/Bottom display with monitor at portrait position.
➢
[SBS 2/1]: 2/3:1/3 side by side display with monitor at landscape position
➢
[POP3]: One image at LH side and top/bottom two images at RH side in landscape monitor.
➢
[POP4]: One image at Top and two images at bottom in landscape monitor.
➢
[3X SBS]: Three split views at landscape
➢
[3X T/B]: Three split views at portrait.
➢
[4x Split]: Four split view multi-viewer. (Monitor at landscape only)
➢
[4x T/B]: Four split views with one bit image at top and 3 small images at the bottom.
➢
PIP (picture in picture): with flexible PIP size (320*180 to 1920*1200), location and aspect ratio.
➢
Except [4x split] function, all the other PIP/POP functions can support monitor at portrait and
landscape position. PIP/POP images also support 90/180/270 degrees rotation and flip up to 4k/2k
60Hz.
➢
Except preset 3 and 4 split views, cropping function is available in PIP and POP image for further
location, size and aspect ratio adjustment as well as creating image borders with black or blue color.
➢
All the inputs for main and sub-images can be up to 4k/2k 60Hz 4:4:4 signals.
E. Video wall function
➢
Image cropping, split and location assignment for each projector.
➢
Video Wall overlap functions up to +_1800 pixels in H&V direction in each edge:
-
Flexible aspect ratio adjustment in each edge.
-
Image position adjustment
-
Image cropping area adjustment.
-
Irregular video wall application
