G-602
15
maintain the same without adjustment until new PC is connected or new PC timing is applied to
GeoBox. After edge blending setup, please use the same signal source to avoid position shift.
b
、
If the projector is connected through VGA, user needs to use HDMI to VGA converter. Projector
will execute automatic image position alignment. The 1
st
automatic position alignment will be
executed before GeoBox implement geometry alignment. After user finishes system setup, the
image for projector will be changed. Once power on GeoBox or projector again, projector may
execute position auto-alignment again and cause edge blending issue.
c
、
Please disable projector VGA input automatic alignment function to avoid image shift.
d
、
If possible, please apply digital signals for both input and output in GeoBox.
5 Geometry alignment by Gwarp2 PC tool
5.1 System connection
a
、
Connect G-602 and PC via Micro USB cable. Gwarp2 is HID interface and no drive is required.
b
、
User can create different language for Gwarp2.
c
、
Open [Gwarp2.exe]. Click [Connect] to connect COM port. After connection, it will show input
signal resolution and [Disconnect] icon. If unable to connect, please re-plug Micro USB cable in
PC side or re-open Gwarp2 PC tool.
d
、
After connection, please select CH1 for RH channel and CH2 for LH channel for further
operation.
e
、
Please download Gawrp2 PC tool and user guide from website at
www.vnstw.com
.
