![background image](http://html.mh-extra.com/html/vlt/mcd-500/mcd-500_operating-instructions-manual_1042924054.webp)
7.2.3 Loggings
The Loggings menu allows the user to view performance
information in real-time graphs.
•
Current (%FLC)
•
Motor Temp (%)
•
Motor kW (%)
•
Motor kVA (%)
•
Motor pf
The newest information is displayed at the right hand
edge of the screen. The graph can be paused to analyse
data by pressing and holding the [OK] button. To re-start
the graph, press and hold [OK].
7.3 Main Menu
The Main Menu button provides access to menus for
setting up the MCD 500 for complex applications and for
monitoring its performance.
7.3.1 Parameters
Parameters allows viewing and changing all programmable
parameters that control how the MCD 500 operates.
To open Parameters, press [Main Menu] then select
Parameters.
To navigate through Parameters:
•
to scroll through parameter groups, press [
▲
] or
[
▼
].
•
to view the parameters in a group, press [OK].
•
to return to the previous level, press [Back].
•
to close Parameters, press the [Back].
To change a parameter value:
•
scroll to the appropriate parameter and press
[OK] to enter edit mode.
•
to alter the parameter setting, use the [
▲
] and [
▼
]
buttons.
•
to save changes, press [OK]. The setting shown
on the display will be saved and the LCP will
return to the parameter list.
•
to cancel changes, press [Back]. The LCP will
return to the parameter list without saving
changes.
7.3.2 Parameter Shortcut
The MCD 500 also includes a parameter shortcut, which
allows you to directly access a parameter within the
Parameters menu.
•
To access the parameter shortcut, press [Main
Menu] for three seconds
•
Use [
▲
] or [
▼
] to select the parameter group.
•
Press [OK] or [Back] to move the cursor.
•
Use [
▲
] or [
▼
] to select the parameter number.
Parameter shortcut
Please enter a
Parameter number
01-01
Table 7.5
Programming
MCD 500 Operating Instruction
MG17K402 - VLT
®
is a registered Danfoss trademark
53
7
7