43
H8030 Home Theater Projector - User Manual
Operations Commands:
Operations commands allow more flexible and direct control
of the projector. The syntafor operations commands is as follows:
op <operation> <command>[CR]
(Precede
<operation>
and
<command>
with a space.)
The command type can be one of 5 functions:
Operation Control Commands
Function
Command
Action on unit
Set
= <value>
Makes the unit take that value.
Get
?
asks what the current value is.
Increment
+
Add 1 to the current value.
Decrement
-
Subtracts 1 from the current value.
Execute
Performs and action as a reset.
•
Below are lists the valid operations commands. For all but Execute functions, the
response from the projector is the command and “= <value>” where <value> is the
current value or “NA” if the value is not available. For Execute functions the response
is the same command. All responses are in UPPERCASE.
Some operations command samples:
Input
Response
op bright ? [CR]
OP BRIGHT = 100
op [CR]
OP BRIGHT = 101
op bright = 127 [CR]
OP BRIGHT = 127
op bright - [CR]
OP BRIGHT = 126
op sharp. simple = 50 [CR]
Unknown Command
op sharp.simple ? [CR]
Unknown Command
Summary of Contents for H8030
Page 1: ...H8030 User s Manual ...
