36
H8030 Home Theater Projector - User Manual
Logo Display:
This feature enable and disable Vivitek brand logo during projector warming
up stage
.
Lamp Power:
This control ECO will automatically set the lamp power to 80%. Standard
will set the power to 100%. Standard Projection is carried out using the normal lamp
power to obtain the brightest projection display. ECO Projection is carried out in the
energy saving mode to ensure the longest service life of the lamp.
OSD Introduction - CONTROL
Select Control from the Main Menu to set various options related to control of the projector.
MAIN
SERVICE
LANGUAGE
CONTROL
SYSTEM
ADVANCED
Menu = Exit
Menu Select ◄►
Scroll ▲▼
1 Key
2 Key
3 Key
4 Key
5 Key
Trigger-1
Auto Source
Enter
Enter
Enter
Enter
Enter
Screen 16:9 Letterbox 4:3 4:3 Narrow RS232
On
Off
1 Key / 2 Key / 3 Key / 4 Key / 5 Key:
These menu items assign the function of the keys
numbered 1 through 5 on the remote
.
There are seven sources corresponding to the eight connections to the projector. When
you assign a source to a numbered key, the projector immediately goes to that source
when the key assigned to it is pressed.
If the chosen source is disabled via the Source Enable menu, this setting has no effect.
Trigger 1:
Select Trigger 1 from the Control menu to specify when the Trigger 1 port
outputs 12 volts. There is a three-second delay before activation to prevent operation while
selecting an aspect ratio.
•
Screen: The port to output 12 volts whenever the lamp is on.
•
16:9: Causes the port to output 12 volts whenever the 16:9 aspect ratio is chosen.
•
Letterbox: Causes the port to output 12 volts whenever the Letterbox aspect ratio is
chosen.
•
4:3: Causes the port to output 12 volts whenever the 4:3 aspect ratio is chosen.
•
4:3 Narrow: Causes the port to output 12 volts whenever the 4:3 Narrow aspect ratio is
chosen.
•
RS232: Causes the port to output 12 volts when an RS232 screen trigger 1 “on”
command is received and stop when trigger 1 “off” command is received. The 12 volt
output also stops when the projector is turned off.
Auto Source:
Default setting is “Off”. By enabling this function, the projector will
automatically determine the source of input every time it is turned on so that the user will
not have to make the selection on the OSD Menu. Setting the function off will require the
Summary of Contents for H8030
Page 1: ...H8030 User s Manual ...